Carbonators for Soda Making

These Carbonators are ideal for small scale soda factories who want to increase their production capacities. The carbonators are very robust, sturdy & made from SS 304. They are of simple construction, hence, maintenance & repairs are very easy. Due to their special internal construction, quality of soda is high & better gas volumes can be achieved.

They have a shower & a series of SS Plates mounted one on top of the other. The water is showered inside the carbonator and trickles down the plates. This ensures thorough saturation.

A highly efficient Triplex pump feeds the carbonator with water. The pump has high quality durable seals that ensures very low maintenance of the pump. Water is fed by the pump to the carbonator from the top. CO2 gas is fed to the carbonator through a Pressure Regulating Valve from the bottom. The whole assembly is mounted on a SS stand.

The carbonators are available in three sizes

1. Small - 5” diameter x 2.5 ft. height. This carbonator is sufficient to feed 2 fillers at a time.
2. Medium - 8” diameter x 3.5 ft. height. This carbonator is sufficient to feed 3 fillers at a time.
3. Large - 12” diameter x 5 ft. height. This carbonator is sufficient to feed 5 fillers at a time.
    
   
   

   for more details contact on: info@trumarkindia.com

   
   

   
   

   for machine videos please subscribe & visit.. www.youtube.com/trumarkpharma
   
   

   Visit our websites:

   www.liquid-filling-machine.com
   www.trumarkindia.com

Additional Filler - Manual

The Table model filler is used for filling Soda / Soft drink in PET Bottles. It can be mounted on a table & attached with the main Soda Machine with the help of a copper or stainless steel pipe. It is very easy to use & is trouble free.

The PET Bottle is held on the machine by its neck. The lower handle is pressed & the bottle moves up into the filling head. A washer seats on the mouth of the bottle. Next the filling lever is pressed & soda flows into the bottle. The snift valve on the side of the filling head helps the air in the bottle to escape thus ensuring an even fill & good quality of soda.

Advantages of the Filler:

• Easy to operate
• Ideal for existing soda & soft drink factories who want to fill in PET Bottles
• Virtually maintenance free
• Spares of main soda machine are suitable for this machine
• Production capacity 200-250 (1.5 ltr.) Bottles per hour
• Light weight & portable
• The machine is delivered in ready to use condition & therefore does not require elaborate assembly.
  
  
  

  for more details contact on:  info@trumarkindia.com

  
  

  
  

  for machine videos please subscribe & visit.. www.youtube.com/trumarkpharma
  
  

  Visit our websites:

  www.liquid-filling-machine.com
  www.trumarkindia.com

Semi Automatic Bottle Washing Machine

	This is a compact washing machine for glass bottles. It is made fully of SS 304. It consists of a Brushing unit mounted on one side of the machine. The unit has 4 brushes. An extra set of mouth cleaning brushes are also provided. The brushed bottles are then kept upside down on the adjoining rinser trays which are of plastic. These trays can hold 24 bottles. Once the tray is full, it is manually pushed and it goes to the next place where the bottles are rinsed with high speed jets of water. For this two ½ HP pumps are provided. The machine can hold 6 trays in a row. The bottles are rinsed two times one after the other. The rinsed water falls back into the plastic bin at the bottom and is recycled. The bin can hold about 100 litres of water. It is provided with water inlet & outlet ball valves.
for more details contact on:  info@trumarkindia.com for machine videos please subscribe & visit.. www.youtube.com/trumarkpharma Visit our websites: www.liquid-filling-machine.com www.trumarkindia.com

Rotary Aerated Water Making Machine

 Semi Automatic Rotary Soda / Soft Drink Machine for Glass bottles is a unique machine designed and developed for the small scale soda/soft drink manufacturer. The machine is basically simple and easy to use and does not require any skilled labor.

The machine is pneumatically operated. It's simple construction and functioning needs very little maintenance. The average production of the machine is about 24 bottles per minute. All three sizes 200 ml / 250 ml / 300 ml can be filled on the machine.

The machine has a central control panel from where all the functions of the machine can be controlled by the main operator. The machine is powered by a 1 Hp motor and is supplied with a 3 Hp III ph air compressor (optional) and a suitable Carbonator. The rotations per minute (RPM) and therefore the production can be set with the help of mechanical speed controller. The machine has six filling heads. Three persons are needed to operate the machine. As the heads turn at fixed speed one person has the job of inserting the crowns, the next person keeps the bottles. Filling and crown capping take place automatically. The third person removes the filled and capped bottles. All parameters such as crown capping pressure, gasket rubber pressure, soda pressure, soda inlet quantity, air compressor pressure etc can be accurately controlled and monitored.

The salient features of the machine are:

• Easy to use with very little maintenance
• Maintenance is limited to change of washers and springs. These are same as in ordinary soda/soft drink machines and easily available.
• All pneumatic equipment used are of the best quality “JANATICS” make.
• The machine is very sturdy and it is fabricated out of stainless steel 304 grade.
• The motor and gear box used are of the best quality.
• A stainless steel guard has been provided on the filling/capping side to avoid bottle breakage injury.
• The machine is compact and can be installed in a comparatively small space.
• All spares of the machine are readily available.
• The simple construction of the machine ensures that it is user serviceable thus reducing down time.
• The pneumatic section of the machine is easily accessible. So minor adjustments and servicing can be done quickly.
• Air & soda connection points are provided at easily accessible points.
• The carbonator supplied with the machine is fitted with an automatic water level controller to switch on and off the pump according to the water level in it and therefore does not require constant monitoring.
• The bottle table level can be easily adjusted according to the size and height of bottles.
  
  
  
  
  for more details contact on:  info@trumarkindia.com
  
  
  
  
  for machine videos please subscribe & visit.. www.youtube.com/trumarkpharma
  

  Visit our websites:

  www.liquid-filling-machine.com
  www.trumarkindia.com
  
  

Additional Filler - Pneumatic

This is an additional filler, pneumatically operated, required for increasing production. This unit consists of a M. S. Box Stand on which are mounted the Filling Head and the Capping arrangement. This is in effect part of the main machine and is to be joined to it with the help of a copper / stainless steel pipe. Soda made in the main machine flows to this unit where another person can do the production. Therefore the production is doubled. The Filling Head and the foot assembly are the same as in the main machine and the maintenance and operating procedure are the same as for the main machine.

The Pneumatic model is very easy to use & cuts down on manual labour drastically. A single lever does both filling & capping operations. An air compressor is required to operate this machine.

In case one does not have the main machine, an additional carbonator will have to be purchased.

 

for more details contact on: trumarkpharma@yahoo.com

for machine videos please subscribe & visit.. www.youtube.com/trumarkpharma

Visit our websites:

www.liquid-filling-machine.com
www.trumarkindia.com

Ultra Violet Filter

This is an additional filler, pneumatically operated, required for increasing production. This unit consists of a M. S. Box Stand on which are mounted the Filling Head and the Capping arrangement. This is in effect part of the main machine and is to be joined to it with the help of a copper / stainless steel pipe. Soda made in the main machine flows to this unit where another person can do the production. Therefore the production is doubled. The Filling Head and the foot assembly are the same as in the main machine and the maintenance and operating procedure are the same as for the main machine.

The Pneumatic model is very easy to use & cuts down on manual labour drastically. A single lever does both filling & capping operations. An air compressor is required to operate this machine.

In case one does not have the main machine, an additional carbonator will have to be purchased.

 

for more details contact on: info@trumarkindia.com

for machine videos please subscribe & visit.. www.youtube.com/trumarkpharma

Visit our websites:

www.liquid-filling-machine.com
www.trumarkindia.com

Syruper - Motorized

 Syruper is an ideal machine for filling accurate quantity of syrup in bottles. This can be used to pre-fill the bottles with syrup for making soft drinks. It is available in manual and motorised models. The motorised machine is very robust and made fully of Stainless steel. The motor and gear box are of the best quality and guaranteed for one year.

The pump consists of a stainless steel flange with screw arrangement. Quantity of liquid can be accurately controlled with the help of the screw. The pump is designed for continuous use and requires very little maintenance.

for more details contact on:  info@trumarkindia.com

for machine videos please subscribe & visit.. www.youtube.com/trumarkpharma

Visit our websites:

www.liquid-filling-machine.com
www.trumarkindia.com